Can Commercial LED Lighting Save You a Bundle?

LEDs have come to dominate the lighting landscape over the last few decades. They’re renowned for their energy efficiency and cost-effectiveness. From decorative lights to home fittings to multimillion dollar film sets, LEDs are everywhere. But if your business is still using older conventional lighting, like incandescent or halogen bulbs, is there a reason to make the switch? Will you really save yourself by going through the trouble of converting to LED?

 

The short answer? Yes. As any commercial electrician in Roanoke will tell you, commercial LED lighting will save you a bundle — in more ways than one.

 

Here are the top reasons to switch to commercial LED lighting:

 

Increased Energy Efficiency

 

A 10,000 sq. ft commercial space will spend anywhere from $4,500-$8,500 a year on electricity bills just to power their lighting. That will depend on if they’re using more energy efficient halogen bulbs, or less efficient incandescent bulbs.

 

LED lights run 65% more efficiently than halogen and 80% more efficiently than incandescent. That means a saving of around $2,000-$6,000 a year just on the electricity bill alone for that 10,000 sq. ft commercial venue. The bigger the commercial space, the greater the saving.

 

For small to medium size businesses, this is a huge cost saving. Over ten years, you can save over $20,000 — just by switching your lights to LED.

 

Longer Life Expectancy

 

You’ve just saved a bundle on your electricity bill by having an electrician in Roanoke replace your lights to LED. That’s where the cost savings end, right?

 

Not quite. LED lights also have substantially longer life expectancies than other bulbs. Incandescent bulbs last around 2,000 hours of use, halogen lamps last up to 4,000. LED, on the other hand, last over 50,000 hours.

 

You will replace incandescent bulbs 25 times before you replace your LEDs once.

 

So even if you’re concerned about the upfront cost of having a commercial electrician in Roanoke replace every bulb in your commercial space with LEDs — and it can be an investment — it will more than pay for itself in a year or two.

 

Less Prone to Faults

 

Incandescent bulbs may last 2,000 hours, but they’ll usually start to dim before then. Halogen can start to flicker.

 

LEDs, on the other hand, are much less prone to faults and won’t dim over time. They’re also much less likely to cause electrical faults and sparks, leading to potential fires.

 

Save on Air Conditioning

 

A perhaps unexpected cost-saving benefit of LED is the lack of heat. Incandescent and halogen lighting convert 90% and 80% of their energy into heat respectively. For all that extra energy they use, little of it turns into light.

 

LEDs, on the other hand, convert 80% of their energy into light and only 20% into heat. This means your commercial space won’t heat up as much, lightening the load on your air conditioning system.

 

Interested in saving yourself a bundle by switching to LED lighting? Contact your commercial electrician in Roanoke, Varney today to get started.

 

/by

Commercial Landlords Are Responsible for Electrical Systems

switchgearOwning commercial property comes with many obligations and responsibilities. One of those responsibilities is to care for the electrical system that serves the building or buildings you own. If the electrical system falls out of repair and becomes dangerous, those issues are yours to handle.

Working with the right Roanoke electricians is the best way to stay ahead of any electrical issues on your commercial properties. Reach out to Varney today for assistance with this important matter.

It’s the Law

First and foremost, it’s important to understand that your legal responsibility is to care for the electrical system in a building that you own and rent out. There are various laws that relate to this obligation, including the Landlords and Tenants Act of 1985. Not only does the landlord have to ensure that the electrical system is safe when a new occupant moves in, but also the landlord must ensure the safety of the system throughout their stay. There is little room for ambiguity here – it’s the owner’s responsibility to make sure the electrical system is fit for service.

Making a Plan

So, against the background of that obligation, it’s important to think about how a landlord can stay ahead of the game on this point. Obviously, in addition to the primary concern here – which is safety – there is also the issue of client satisfaction to consider. If the power is routinely going out in a commercial building, the tenants will not be happy and may not wish to continue their lease. Also, it will be hard to get new tenants to occupy that space if known electrical problems are a concern.

Getting the right help is the best thing you can do to avoid electrical problems at your properties. Working with an experienced team like Varney can take this task off your plate and place it in the hands of talented and knowledgeable professionals. A good commercial electrician will be able to install new systems, inspect old systems, and perform any repairs that are needed. You’ll rest easier at night, and your tenants will be happier, when electrical work is done right and passes all inspections.

Ongoing Schedule

Getting electrical systems installed properly at the start of a new development is a good foundation, but that doesn’t mean the job is done. Rather, ongoing inspections and updates should be performed at regular intervals as time passes. Keeping up with the electrical system means you won’t be as likely to run into big problems down the line – you can address little issues here and there and maintain a system that serves your buildings and tenants nicely.

Again, with this point, working with a commercial electrician in Roanoke like Varney is the easiest and best solution. The Varney electrician will help you set up a schedule for inspections and updates and will be able to provide valuable advice along the way when any problems arise.

/by

Electrical Safety Tips for the Winter

Thermostat phootThere is no way around the following point – electricity is dangerous. While the modern world has managed to harness electricity in a way that allows us to do many things that would have previously been impossible, it still remains true that we need to be very careful around any live wires, outlets, etc. There are some specific electrical safety risks that arise in the winter months, and this article will take a closer look at those points.

To work with a leading commercial electrician in the Mid-Atlantic, don’t hesitate to reach out to Varney. The pros at Varney will navigate your electrical projects safely and in a timely manner, so you can focus on moving your business forward.

Taking Some Basic Precautions

Fortunately, most of the things you can do to avoid electrical hazards in the winter months are pretty simple. You certainly don’t need to have an in-depth knowledge of electrical work or anything like that – just paying attention to what situations are risky and how to mitigate those risks will be good enough. Here are some good starting points to avoid electrical fires, shocks, and other bad outcomes in a commercial setting.

  • Heaters require supervision. It’s common – and okay – to run heating units in the winter months to take the edge off in a cold building. It’s not okay, however, to let those heaters continue to run while no one is around.
  • Use power strips carefully. There are occasions when it’s suitable to use a power strip to provide electricity to several different items. With that said, power strips have their limits, and properly wiring some of your equipment may be necessary if you find your team reaching for power strips too often. As a general rule of thumb, power strips should not be seen as a permanent option – if they are used to deliver power to something that is always in use, work with a commercial electrician like Varney to create a proper solution.
  • Careful with flammables. This is another one that should fall into the category of “common sense”. In the winter months, you may have more items around your building that are flammable in nature, such as jackets, extra towels, blankets, and more. None of those things should be left to any source of heat where they could potentially combust. Make it a rule to place nothing, flammable or otherwise, particularly close to heat sources just to be safe.

Get Professional Help with Electrical Matters

Since the need for power often goes up in the winter as the temperatures drop and sunlight is less prevalent, you may find yourself cutting corners or making sacrifices on safety just to get the job done. That’s never okay when it comes to electricity. A seemingly minor change or adjustment to how your electrical equipment is being handled could lead to a dangerous spark or fire. Get out ahead of these problems by working with Varney to solve any electrical challenges in a way that is up to code and will keep all people and equipment safe.

/by
,

5 Reasons to Get Electrical Inspections

The electrical system that serves your building is one of the most important components that you rely on each day. And, given the inherent risks associated with electricity, it is also one that presents potential danger if it is not in proper working order. By having an electrical inspection performed, you can track down any problem areas and have them addressed before a fire or injury occurs.

 

As a leading commercial electrician in Richmond, Varney is the right team to call on when you need an inspection performed. The trained professionals that do the work will pay attention to the smallest details and provide you valuable insight into the health of your whole electrical system.

 

It’s All About Safety

Without a doubt, the top reason to have regular electrical inspections performed at your commercial property is safety. You don’t want to endanger anyone who works in your buildings or visits the property for any reason. Electrical fires can often be prevented by finding signs of trouble before they reach the point of creating a spark and igniting a blaze. Work with a professional team like Varney to thoroughly inspect all the electrical work that serves your buildings and get in front of this issue before it causes a disaster.

 

Stay in Business

If you run into surprise electrical problems during the normal course of business, you may have to halt operations while you deal with those issues. That kind of interruption can have a major impact on the bottom line. Avoid such losses by investing in electrical inspections to make sure your whole system is in top working order.

 

Optimize Efficiency

Are you spending more on power than you think you should given the way your location operates? It may be that an aging electrical system is running inefficiently and is leading to higher electrical bills. Inspections can spot parts of your system that might be due for an upgrade, allowing you to keep up with the times and avoid having inefficiencies drag you down.

 

Boost the Bottom Line

This is one of those areas where you might need to spend some money in order to save some money. Electrical inspections aren’t always free, but they do have the potential to save you significantly on the back end. If some of the points above play out at your facility – you avoid a fire or can improve efficiency, for example – the financial gain from an electrical inspection can be significant.

 

Find Ways to Become Better

Every business manager or owner wants to improve the way the company operates each day. While the electrical system that serves your buildings might not be your main focus, every little improvement can help. Think of it this way – if your competitors are doing the work of optimizing their electrical system to save money and operate more efficiently, shouldn’t you be doing the same? There is no potential advantage too small to pursue, meaning it’s well worth your time and investment to book an appointment for an electrical inspection right away.

/by

The Importance of the Correct Lighting in an Office Building

Have you ever tried to do office work in a poorly lit space? While your computer screen provides its own light, the rest of the space can be hard to use if the overhead lighting is not sufficient. This article will take a closer look at why this topic is so important and what you can do to solve any problems that exist in your space.

 

For lighting and other projects that require a commercial electrician in Richmond, VA, turn to Varney. As a leader in this industry with a strong reputation throughout the Mid-Atlantic, your project will be in good hands with the Varney team.

 

Practical Limitations

Perhaps the most obvious issue associated with correct lighting is simply not being able to see what you are doing. If part of the office is poorly lit, workers in that area may struggle to see the things they are trying to use or create. In the worst-case scenario, that work won’t get done, or it will be done poorly. More likely, the workers will have to find ways around the lighting limitations, such as moving the work, using additional light sources, etc. All those workarounds take time and effort and will take away from the overall productivity of the space.

 

Ensuring the entire office is properly lit should be seen as just one of many steps you take toward optimizing productivity. For the same reasons that you don’t want employees doing their work on old, slow computers, you also don’t want them working in dimly lit spaces. Provide them with the light they need to do a great job and you can likely expect some improvements.

 

Worker Wellbeing

Beyond productivity, there is the matter of the wellbeing of your staff to consider. Without the right light, workers may struggle with issues like headaches and strained eyes, leaving them feeling uncomfortable at their desks. Poorly lit spaces can also contribute to drowsiness, which is not an enjoyable feeling in the middle of a workday. Of course, these issues are not only problems for your team to deal with, but they will tie back into the discussion on productivity. So, we see again how lighting will help your teams get more things done, and you will be doing them a favor by avoiding some of the unwanted side health side effects that come with bad lights.

 

Asking Questions

One of the easiest ways to learn about the lighting in your office spaces is to ask the individuals who work in those spaces each day. Are there certain parts of the office that aren’t bright enough for the tasks at hand? Or perhaps there are areas that are actually too bright? No one will know better than those who use the space regularly, so one way to find out what would help them is go directly to them to get feedback and to decide on how to improve your office lighting and then contact Varney to see what needs to be done.  

/by

6 Danger Signs That Your Commercial Electrical Panel Box is Overloaded

Electrical systems are a necessary part of any business. Large buildings, especially in the industrial sector, require one or more electric panel boxes to control the entire electrical system. When more electricity is being pulled than what an electric box is able to handle, it gets overloaded. Even with safety precautions in place, an overload can be dangerous if not handled properly by a commercially licensed electrician.

By knowing what to look for, you can catch the problem before it gets serious. If you notice any of these 6 danger signs, you may have an overloaded electric panel box.

  1. Tripping circuit breakers. Circuit breakers are designed to trip when too much power is being drawn. This is a safety measure that simply cuts off electricity to the outlet or area where the electricity overload is coming from.
  2. Dimming lights. If the lights seem to dim randomly or especially when fixtures or equipment is turned on, it’s a sign that the electric box is overloaded and cannot supply sufficient power for everything that is connected to it.
  3. Electrical appliances and tools lack sufficient power. Does it seem like your power tools are running sluggishly? Are appliances a little weak? These are signs that electrical equipment is not getting the necessary amount of electricity from the box as it should, most likely due to an overload.
  4. Outlets or outlet covers feel hot. Excessive electricity creates heat. When your electric box is over loaded and too much electricity is being drawn to and from it, things start to get heated. Heat is just one step before fire, so it should be taken seriously. If electrical outlets, wires, switches, or electrical components of any kind feel hot, discontinue use of them immediately.
  5. A burning smell coming from any electrical source or equipment. Where there’s smoke, there is usually fire. If you smell something burning, then something has become hot enough to burn. An electrical smell is unique to other burning smells, so you should know that the source is something in the electrical system. As stated before, discontinue use of electronics until the source of the burning is discovered and repaired.
  6. Buzzing sound coming from an electrical outlet or switch. Buzzing is typically due to an overloaded circuit or electric box. When too much electricity is surging through a circuit, vibration occurs, causing the buzzing sound. This is often a warning sign that one of the above signs is likely to occur next.

 

Safety Should Be Your Top Priority

Electric panel box overloads are not something to take lightly. Electrical systems are still the most common source of building fires. To keep your people and your building safe, call a licensed electrician at the first sign of an electrical overload. If even one of the above danger signs is present, turn off electricity to the box in question (or the entire building to be safe) and seek help from an experienced commercially licensed electrician, such as Varney Inc. Call (540) 343-0155 or request service.

/by

What to Look for in a Commercial Electrician

Commercial ElectricianAre you in need of a commercial electrician in Roanoke, VA? If so, do you know what to look for? With so many choices, it can be difficult to determine who to call for your business’s electrical needs. Consider these important qualities when comparing commercial electricians.

Experience

One of the most important qualities to look for in a commercial electrician is experience. How many years of experience does the company have? Is all of that experience in commercial electrical work? Residential electrical experience does not count for commercial experience. Don’t hire someone who claims to be able to handle commercial-grade electrical work unless they can prove it by giving you references of other businesses they have done work for.

Positive References

Always ask for references and follow through by contacting them. Ask questions about the type of job the electrician did for them and how they felt about the work during and after it was completed. Ask them if they would use the same electrician again on future projects.

Licensing

Any electrician who performs commercial electrical work must have a commercial electrician license in the state where they provide services. Check with the state Department of Professional and Occupational Regulation for the status of a business’s license before hiring them.

Proof of Insurance

Get official proof that the electrician, as well as their assistants, are bonded and insured. Insurance is there to make sure you are not liable for any accidents or injuries the electrician or their employees incur on the job. It also covers any damages that occur from problems during the job and covers the cost of the job in case the electrician doesn’t finish the job.

Status with the Better Business Bureau

The BBB keeps records on businesses that give consumers an idea of the company’s past performance. A business’s rating with the BBB is determined by factors such as licensing, customer disputes and resolution, and years of existence. An A+ rating is the best a business can achieve.

Excellent Teamwork and Communication

This one can be hard to determine without seeing an electrician in action, but it’s very important. Commercial projects are typically large enough that multiple team members will need to work together to complete it. A commercial electrician must communicate well with their team in order to get the job done efficiently. This is a question you could ask when you speak to their references.

Safety

Look for an electrician that has solid safety procedures in place and a good safety rating. Electrical work can be dangerous for the workers involved unless proper precautions are taken. It is also important that electrical work is done correctly for the safety of those who use the building.

Looking for a Commercial Electrician in Roanoke, VA with these Qualities?

Varney Inc. has over 60 years of experience in the commercial electrical field. Licensed in Virginia, West Virginia, North Carolina, South Carolina, Tennessee, Georgia, and Florida, Varney Inc. has worked on projects throughout the southeastern U.S. If you’re looking for a reliable, experienced commercial electrician in Roanoke, VA, call Varney Inc. today at (540) 343-0155.

/by

4 Ways Integrated Systems can Streamline your Business

Could your business run more smoothly? Could you be making more and spending less? The answer is yes, with the help of integrated systems. But what exactly does that mean?

Integrated systems is a broad term to describe the networking of all of the working parts of a business. This includes computers, phones, security systems, safety systems, HVAC, and plumbing within a building or between multiple buildings that are miles apart. Integrated systems for business in VA can streamline your operations in many ways.

Implementing Integrated Systems in your Business will: 

 

  • Increase productivity. No matter what your business is, whether it’s manufacturing, sales, food service, retail, etc., integrated systems will make what you do easier for every employee, which translates to better productivity for your business as a whole. Generate more products, increase sales, and satisfy more customers when your business’s systems are all working together, effortlessly. 
  • Improve efficiency. Integrated systems will improve efficiency in many ways. Energy efficiency improves when electrical systems, HVAC, and plumbing are all networked and automatically monitored for optimal performance. Efficiency also refers to business operations, streamlining processes to make simple tasks automated so that employees can focus their efforts on the personalized tasks that computers can’t do. 
  • Reduce travel expenses. Integrating technology makes it possible for meetings and training to take place across a distance via conference calls and video calls. Many things that once required travel between branches of a business are now possible to accomplish remotely. Avoiding unnecessary travel expenses saves your business money. 
  • Improve communication. No business can run without communication. Communication must take place between employees, between employees and managers, between employees and customers, and so on. Integrated systems improve communication between every aspect of your business, even beyond people. With integrated technology, all of your systems can communicate with each other, including electrical, security, HVAC, safety systems, computers, data clouds, and more. 

 

Customizable Integrated Systems for Business in VA

Are you wondering if integrated systems will work for your business? The answer is absolutely. Integrated systems are not one-size-fits-all types of products. Every business has unique needs that require an individualized plan for integrating both internal and external systems. No business is exactly like another, and the different aspects of every building will dictate the software and hardware that will be used to accomplish your goals. 

Varney Inc. Offers Solutions to Improve your Business 

Ready to implement integrated systems in your business? Varney Inc. specializes in integrated systems for business in VA and the surrounding area. Using the latest software packages and state-of-the-art equipment, Varney Inc. can streamline your business to save you money and eliminate many of the common problems that plague businesses and slow down productivity. 

Call (540) 343-0155 today to discuss your options for integrated systems and how it can improve your business.

/by

Warning Signs of Electrical Failure

electrical services

When it comes to commercial buildings, safety is of utmost importance. Large numbers of people are affected by electrical problems in commercial buildings such as offices, stores, hotels, and apartments. Electrical problems, when not recognized and repaired, can pose a fire risk. For their own safety and the safety of others sharing the space, each individual in a building should be trained to recognize the warning signs of electrical failures. If any of the following signs occur, call Varney Inc., one of the top commercial electrical contractors in Virginia.

  • Frequent flickering or dimming of lights. The electrical system may be over-extended, or there may be a short in the wiring somewhere.
  • Wall outlet discoloration. This indicates electrical overheating that could result in a fire if not repaired. Call an electrician immediately if you see this.
  • Tripped circuit breakers and blown fuses that occur repeatedly. This is a sign of overloaded outlets or circuits. The electrical system in your building needs to be repaired to prevent more serious problems.
  • Appliances that deliver a slight shock when touched. Unplug the appliance and discontinue use until an electrician can evaluate the situation and take necessary measures.
  • Tools or appliances that feel warm to the touch. If your tools or electrical appliances feel warm to the touch, it’s a sign that there may be too much current running through them and could be a precursor to an electrical fire. Unplug them immediately and call for help.

Varney Inc., One of the Elite Commercial Electrical Contractors in Virginia, Recommends the Following Safety Precautions:

  • Use caution when moving televisions, computers, and monitors.
  • Microwaves should only be serviced by a professional.
  • Maintain and monitor electrical cords and plugs.
  • Always unplug electrical appliances before working on them.
  • Use the correct wattage for light bulbs and the correct amperage for fuses.
  • Use extreme caution with portable space heaters.
  • Do not overload your power outlets.

Proper use of electricity can prevent fires and electric shock in commercial buildings, saving the lives of the people inside. Allowing professional electricians to service and inspect your electrical systems will prevent personal injury. Varney Inc., commercial electrical contractors in Virginia are ready and available to solve your electrical problems. Stay safe and let professionals handle your electrical systems. If you see any warning signs of electrical issues, call Varney at (800)456-1399 or (540)343-0155.

/by

Top 5 Qualities to Look for in an Industrial Contractor

Industrial ContractorWhen you have a job that needs done for your business, whether it’s an add-on, a repair, or a brand new construction, you need the right industrial contractors. So how do you choose the right company? Look for certain qualities that lead to successful projects and exceptional results.

  1. Innovation. You want a contractor who is up to speed on current technology and has new ideas that he is more than willing to implement at your request. Someone who thinks outside the box and applies the latest methods and materials will ensure that your project will be great.
  2. Communication skills. It is very important that you and your industrial contractor understand each other. Someone with good communication skills can effectively listen as well as they speak. Find someone you feel comfortable talking to so that you express your ideas and wishes and get the results that you are looking for.
  3. Safety. Look at a contractor’s safety history and talk to previous customers about their experience with the company. The contractor should be able to provide you with all of this information.
  4. Organization. You want a contractor who is organized, who can keep the project running smoothly by coordinating all aspects of the job from materials to sub-contractors to tools. Organization means your project will be finished on time.
  5. Honesty. Trust between contractor and customer is crucial for a successful project. You need a contractor who will speak with you honestly. If you have any doubts about this, check references and read reviews of the contractor. Don’t hire someone you don’t trust.

Industrial Contractor, Varney Inc., Embodies these Qualities

If you want to find an industrial contractor who is innovative, organized, honest, safe, and has good communication skills, look no further than Varney Inc. Serving the Roanoke Valley and the surrounding area, Varney provides contractor, plumbing, electrical, mechanical, and integrated systems services to businesses. Call (540) 343-0155 or (800) 456-1399 to speak with Varney about your needs.

/by